Proximity Sensor - 3 mm Diameter, Shielded, Normally Closed - NPN Connection Hardware & Accessories or PRO Servo or Hydraulic

or PRO Servo or Hydraulic - 12" range

C)   Humidity Limits:    0 to 95% (non-condensing)   Isolation Voltage:    2000 V    Frequency:    40 to 400 Hz   Enclosure Rating:    UL

the sensor type should be set to “Yellow”

or output short-circuit) Operation mode Changed with NO/NC switch

This is a replacement connector for TB2 on the DSI board

Proximity Sensor - 3 mm Diameter, Shielded, Normally Closed - NPN Connection Hardware & Accessories or PRO Servo or HydraulicWintriss offers this 3mm diameter shielded proximity sensor as a useful sensor for detecting small features, especially when space inside the die is at a premium. This sensor has an unthreaded housing and should be epoxied into a slip fit hole. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bush or insert. This inductive proximity sensor is Normally Closed; it actuates (turns On) when metal leaves the sensing